September 14th, 2020
May 10th, 2021
Octoplus FRP Tool Offline Installer Setup Download Free
On this page, we have published the latest offline installer setup of the Octoplus FRP tool. Basically, it is a specialist to remove FRP lock from Android devices. Sometimes “boot.img” from combination firmware can be not compatible with the current phone’s firmware.
In that case, the phone will freeze on the logo or will be rebooting after writing such a boot. To restore the phone to its initial condition you need to reflash it with different full stock (original) firmware (or try to write only boot of such firmware).
If you cannot find combination firmware for your model in the “SAMSUNG/COMBINATION” folder in the Support Area, this means we don’t have these files at the moment. As soon as we get new combination firmware, we will upload them into the Support Area. You will need to follow the below points if you are going to use the Octoplus FRP tool.
- Click the “Reset FRP (Download Mode)” button.
- Put the phone in Download Mode (power off the phone, press and hold “Volume-“ + “Home” + “Power ON” buttons).
- Connect the phone to the PC via Micro USB cable.
- Follow Software instructions (prompts).
Now download the latest setup of the Octoplus FRP tool by following the download section menu.